| |
|
- For remote installation of the garage door opener receiver. It may be mounted away from the operator on the ceiling by using the Digi-Code receiver mounting tabs. The model DC5196 adapter will allow connection between the operator terminal and the two-way
- Connect the wires as follows:
-(1) White wire to terminal "1" or "24v" .
-(2) Black wire to terminal "2" or "Relay"
-(3) Red wire terminal "3" or "Common" ("Radio Power")
-(4) Connect push button wires to terminal "1" and "2"
- Where power for the radio receiver is not available from the garage door opener, order Model DC5197 power transformer adaptor for connection between the opener and the remote Digi-Code receiver.
|
|
|
|
|
|
|
View Cart
